Issue |
Fruits
Volume 58, Number 1, January-February 2003
|
|
---|---|---|
Page(s) | 13 - 17 | |
DOI | https://doi.org/10.1051/fruits:2002032 | |
Published online | 15 January 2003 |
Performance of Tahiti lime on Poncirus trifoliata var. monstrosa Flying Dragon in four densities
Estação Experimental de Citricultura de Bebedouro,
PO Box 74, 14700-970 Bebedouro, SP, Brazil
Corresponding author: eecb@coopercitrus.com.br
Introduction. Tahiti lime trees grafted on Rangpur lime grown in São Paulo
State, Brazil, in sub-tropical climatic conditions, have a high level of vigor, poor tolerance to
Phytophthora spp. and low productivity. Using Poncirus trifoliata var. monstrosa Flying
Dragon rootstock which allows one to obtain dwarfed trees and high yields could solve this
problem. Materials and methods. In an experiment set up in November 1994 in Brazil, the
tree size, fruit production and quality of Tahiti lime grafted on trifoliate orange Flying Dragon
were evaluated at four planting spaces: 4 m × 1 m (2 500 treesha-1); 4 m × 1.5 m
(1 666 trees
ha-1); 4 m × 2 m (1 250 trees
ha-1) and 4 m × 2.5 m (1 000 trees
ha-1), in a rand-
omized block design, with four trees per plot. The cultural practices did not include supple-
mentary irrigation. Results. Trees planted in the 4 m × 1 m planting space had greater can-
opy diameters (2.75 m) than trees planted with the other planting spaces. Whatever
the densities considered, tree height did not differ. Average fruit yield (1998 to 2000) was the
greatest on the 4 m × 1 m planting space with 21.6 t
ha-1, significantly differing from the
4 m × 2.5 m planting space with 13.1 t
ha-1. Fruit quality was affected by the plant planting
space, but all the production was commercially acceptable. Discussion. The use of a high
density planting of Tahiti lime grafted on P. trifoliata var. Flying Dragon would be of com-
mercial interest, due to greater yields than trees in traditional cropping systems.
Résumé
Introduction. Dans l'état de São Paulo, Brésil, conditions climatiques subtropi-
cales, les limettiers Tahiti greffés sur limettier Rangpur ont une vigueur élevée, une faible tolé-
rance aux espèces de Phytophthora et une faible productivité. L'utilisation du porte-greffe
Poncirus trifoliata var. monstrosa Flying Dragon qui permet d'obtenir des arbres nains et des
hauts rendements pourrait résoudre ce problème. Matériel et méthodes. Une expérimenta-
tion installée en novembre 1994 au Brésil a permis d'évaluer le développement des arbres,
leur production en fruits et la qualité des limes Tahiti produites par des arbres greffés sur
P. trifoliata var. Flying Dragon. Quatre distances de plantation ont été testées : 4 m × 1 m
(2 500 arbresha-1); 4 m × 1.5 m (1 666 arbres
ha-1); 4 m × 2 m (1 250 arbres
ha-1) et
4 m × 2.5 m (1 000 arbres
ha-1), dans un dispositif en blocs randomisés, avec quatre arbres
par parcelle élémentaire. Les blocs n'ont pas reçu d'irrigation complémentaire. Résultats. Les
arbres plantés à la distance de 4 m × 1 m ont eu une frondaison de plus grand diamètre
(2,75 m) que des arbres plantés aux autres densités. Quelles que soient les densités considé-
rées, la hauteur des arbres n'a pas été différente. Le meilleur rendement moyen en fruits
(21.6 t
ha-1), de 1998 à 2000, a été obtenu avec les arbres plantés à la distance de 4 m × 1 m,
ce qui diffère de manière significative des rendements (13.1 t
ha-1) observés avec les arbres
plantés à 4 m × 2,5 m. La qualité du fruit a été affectée par la densité de plantation, mais
toute la production a été commercialisable. Discussion. L'utilisation d'une plantation à haute
densité de limettiers Tahiti greffés sur P. trifoliata var. Flying Dragon serait commercialement
intéressante du fait de meilleurs rendements alors obtenus par rapport aux arbres des vergers
conduits selon les systèmes traditionnels au Brésil.
Key words: Brazil / Citrus latifolia / rootstocks / dwarfs / density / yields
Mots clés : Brésil / Citrus latifolia / porte greffe / nain / densité / rendement
© CIRAD, EDP Sciences